AES67LINK 3.4 Is Here
It pushes the control software one step further: a new light GUI; a brand-new AFC algorithm that takes the guesswork out of open-mic local reinforcement; plus AI noise reduction, PTP clock jitter monitoring, fully unlocked multicast ports and RTP Timestamp Offset, rebuilt level and mixing pages, and a log mode you can learn in 10 seconds. The canvas in the main image is the fully redrawn DSP component library.
What's New at a Glance
- Light GUI — one-click light / dark
- All-new AFC — local reinforcement without feedback
- AI denoise — a new AI denoise setting
- PTP jitter monitoring — microsecond offset curves
- Multicast unlocked — port / IP / RTP offset
- Level page rebuilt — one device per row
- Matrix rebuilt — Quick Locate navigation
- Log mode — diagnose inside the GUI
Light and Dark: Two GUIs, One Click

The new Light / Dark switch sits at the bottom-left of the status bar, and it repaints the entire interface — routing matrix, levels, DSP canvas, every component window — not a simple color inversion. Dark for dim stages, control booths and night shifts; light for daylight offices, teaching and projection.
The same software can be two working states, day and night.
DSP Library: Every Window Redrawn


The hardest work in this release sits in the place you look at the longest — the entire DSP component library has been redrawn. Compressor, Noise Gate, Delay, Gain, Ducker, Expand, Signal Gen, AutoMixer… every component window now speaks one visual language: a single window background, one style of knob and fader, one numeric field, and a purple BYPASS state you can read at a glance. Meters, gain reduction displays and frequency response curves have all been redrawn. And the chain itself is still open architecture — drag components from the DSP Library on the left straight onto a channel line, and wire up FBE, AEC, AGC or AFC Mixer in whatever order you like.
It's not just about looks. Every window used to have its own button logic, so you memorized where things were; now the same control always sits in the same place, values can be typed straight in, and long-time users won't have to relearn their hands.
DSP is what you stare at for ten hours a day. Make it clearer, and you misread it one less time a day.
All-New AFC Algorithm: Local Reinforcement Without Feedback (DMX Matrix Models Only)

The new AFC Mixer brings feedback cancellation, AEC and noise reduction into a single window: pick your microphone channels in MIC channels, from AnalogIn through NetIn; point Reference Signal at an output channel so AFC recognizes what has already left the speakers instead of crushing every voice as feedback; Parameters lines up Cancel feedback, AEC level, noise reduction or AI denoise, Fast and Lock path; and one click on Measure runs a 10-second automatic measurement.
AI denoise takes a different route: steady noise from air conditioners, projector fans and keyboards no longer needs a gate to hide it — one AI denoise setting pushes it down while sibilance and tails survive.
A room that used to mean EQ, gain and another try, every single time, now takes two clicks to reach a clean reinforcement chain with enough level.
PTP Clock Jitter Monitoring: You See the Clock Move First

PTP Clock adds an Overview jitter page, with offsets measured in microseconds: the slave clock in this capture sits at +3.6 µs, drifting from −19.19 to +10.08 µs over 5 minutes, with −5 ppm frequency correction and 2 hours 52 minutes locked to the master without a single lock loss. The trend chart switches between 1 / 5 / 30 minutes, the event list records only state changes and anomalies, and Raw log goes all the way down when you need it.
When audio clicks or pops every now and then, you used to guess network or clock. Now one look at the curve tells you whether the clock is stable — and the moment it stopped being stable.
Multicast: Port, Address and RTP Timestamp Offset All Unlocked

Creating a multicast stream is no longer auto-or-nothing: the port is editable, the multicast address offers Custom next to Auto (or hit Another one for a different address), and the advanced options add RTP timestamp offset (ms) for third-party AES67 devices that need it — normally left at 0.
Cross-vendor integration lines up address, port and timestamp offset in a single pass, instead of you chasing the receiver's expectations.
Level Monitoring Rebuilt: One Row Per Device

Device Level is now one device per row with four mini level strips side by side: Analog In / Network In / Analog Out / Network Out, channel numbers tucked underneath, so a dead channel or one riding into clip is obvious at a glance.
Four devices or forty, you no longer open them one by one — that's the difference between monitoring and looking.
Internal Mixing: Locate Faster, Route in One Click

A new Quick Locate panel on the left of the Matrix page: enter an input range (In 1–9) and an output range (Out 1–8), hit Jump, and you land on that block of crosspoints — no more dragging across a large matrix. Clear All Route, Reset All Gain and All Sharing take care of the rest in one click.
Changing a dozen routes goes from dozens of clicks to two.
Log Mode: Every Problem, Located Inside the GUI

Event Log is now a diagnostic tool you can actually use: four filters (time range, level, category, keyword), a live header showing 16 events · Errors 0 · Info 16 together with Recording state and PTP listener OK, and a one-click Export CSV. Route changes, devices arriving and leaving, master/slave clock switches — all of it lands on one timeline, with device name and IP attached.
Instead of asking the site to describe what happened, you ask them to filter to warnings and above, export the CSV, and the incident arrives intact.
Details Too: Volume, Group Volume, Latency Stats



- Volume — every channel gains a dB readout, Mic Gain, Phantom Power and 180° polarity, with faders aligned to their meters
- Group volume — now its own page, with multiple groups side by side, each listing its members and channel count
- Latency stats — new Total / Average / Maximum cards, log-scale distribution bars and a Delay Bins table
The handful of moves you make most often during a show no longer require hopping between windows.
Download the latest software: get the newest AES67LINK 3.4 installer and documentation at docs.digisynthetic.com.



